Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MTS3

Linear Megacode 3-Ch Visor Transmitter 318MHz (DNT00093)

Operates up to 3 garage doors
Easy to add/remove programming
LED light confirms battery power
Requires one (1) CR2032 coin-cell battery (battery included)
Includes Visor Clip
Ergonomically designed
For use with model LDCO863B garage door opener
Replaced the MCT-3 and MTR3

Programming instructions Instructions de programmation

EXA-2000

Linear Directional Antenna (AAE00331)

Compatible with all Linear receivers with Type F antenna connector
Receives signals in 288 to 320 MHz range
Directional remote antenna designed to enhance the radio range of Linear receivers
Includes 10 feet of coax
Clamp for mounting
Dimensions: 21” W x 5” H x 1.5” D

.......more details

MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

Makes any garage door operator compatible with MegaCode transmitters
Simple plug-in design
Easy to install - one connection using two-conductor wire
Memory: storage for up to 10 MegaCode transmitters
Normally open contact activates for 0.5 seconds
Power: 110 VAC +/- 10% 60 Hz

.......more details

HAE00018

Linear Inner Slide Assembly - Chain (HCT)

For LSO50 LDO33 & LDO50

309013

Linear 1-Channel Multi-Code Receiver 310 MHz

Three tabs for universal mounting
One N/O relay
Compatible with 310 MHz Stanley and Multi-Code transmitters only.
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

109020

Linear 1-Channel Multi-Code Receiver 300 MHz

Three tabs for universal mounting
One "NO" relay
Compatible with 10 dip- swith 300 MHz Multi-code transmitters
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

217436

Linear Drive Sprocket - Chain (HCT)

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

7FT-BELT-LDO

Linear 7ft Belt Drive Rail for LD050/LS050/LDCO (HBT7C)

7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 carriage house I-rail conversion kit

LDC801

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart

109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

Operates on 12-24 volts AC or DC power
One channel
Whip antenna
3-foot antenna coax and bulkhead connector
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz or 310 MHz (jumper selectable)

.......more details

Programming Instructions

DD-KIT

Linear Double Delta Radio Kit (2X DT & 1X DR)

Kit includes two DT remotes and one DR receiver
Same as: DNP00006
Operates on 24 VAC power
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

Installation Manual

HAE00040

Linear Control Logic/Receiver Board

Replaces HAE00039
Control board for LSO LDO LCO models

8FT-CHAIN-LDO

Linear 8ft Chain Rail for LD050/LS050/LDCO (HCT8C)

8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

LD050

Linear 1/2 HP Deluxe Single Lamp Residential Garage Door Opener - Rails extra

Compatible with belt-drive or chain-drive T or I beam rails up to 10'
Rock solid performance
Diagnostic system indicates six possible trouble conditions
100-watt courtesy light (bulb not included)
Built-in MegaCode format receiver
All operator controls and indicators on one side

.......more details

Installation Manual User Manual Sell Sheet Remote compatibility chart

8FT-BELT-LDO

Linear 8ft Belt Drive Rail for LD050/LS050/LDCO (HBT8C)

8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

MTR3

Linear 3-Channel Visor Transmitter 318MHz ** To extent of Inventory

Activates three MegaCode receivers
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)

.......more details

Programming instructions Instructions de programmation

EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
The cable connects to the antenna base on one end and the receivers F connector on the other.
If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
Compatible with all Linear receivers with Type F antenna connector
Receives signals in 288 to 320 MHz range

.......more details

Installation manual